Personal tools
Home » Sponsors » Exhibitors & Sponsors

Exhibitors & Sponsors

Gold Sponsors

CST develops and markets software for the simulation of electromagnetic fields. Its products allow you to characterize, design and optimize electromagnetic devices all before going into the lab or measurement chamber. The extensive range of tools integrated in CST STUDIO SUITE® enables numerous applications to be analyzed without leaving the user-friendly CST design environment and can offer additional security through cross verification. CST's customers operate in industries as diverse as Defense, Telecommunications, Automotive, Electronics, and Medical Equipment. More information at


Space is a key asset for Europe, providing essential information needed by decision-makers to respond to global challenges. Space provides indispensable technologies and services, and increases our understanding of our planet and the Universe. Since 1975, the European Space Agency (ESA) has been shaping the development of this space capability.

EMSS distributes the leading field simulation software package FEKO and the antenna design tool Antenna Magus. FEKO is an electromagnetic (EM) analysis software suite, based on multiple state of the art computational techniques for solving a wide range of EM problems for a large variety of industries. Typical applications include: antenna analysis (e.g. windscreen antennas), antenna placement (e.g. on large structures like automobiles, airplanes, ships), EMC (cable coupling analysis, etc.), Bio-electromagnetics, RF component analysis, 3D EM circuits, radomes as well as scattering problems (RCS). Antenna Magus is the first antenna design tool of its kind. Its huge searchable collection of antennas can be explored to find, design and export models of designed antennas to FEKO. EMSS also offers consulting in the areas EMC, antennas and general application of computational electromagnetics as well as special extensions to numerical electromagnetics software according to customer requirements.


The Antenna Measurement Techniques Association (AMTA) is a non-profit professional organization for members involved in research and development of antenna and radar-scattering measurements. The principal objective of AMTA is to provide a forum for the exchange of information on electromagnetic measurement techniques and problems.

EPFL is one of the two Ecoles Polytechniques in Switzerland. EPFL has three missions: education, research and technology transfer at the highest international level. EPFL is ranked (2010) as the best European university in the area of Engineering.

IDS S.p.A. is an independent system engineering company operating in both defence and civilian fields The company is organised into business lines:

SPACE LABORATORY: Consultancy and software solutions for antenna design and antenna integration on spacecrafts, verification and qualification activities

NAVAL DIVISION:  Supports and advises navies, shipyards and the naval industry in optimising the electromagnetic (EM) performance of naval platforms and fleets.

AERONAUTICAL DIVISION: Provides aeronautical industries and  defence ministries with comprehensive engineering support in areas ranging from the development of flight control systems to electromagnetic design of air platforms .

AERONAVIGATION DIVISION: Supports civil and military aviation agencies and air navigation service providers with ICAO/FAA compliant integrated systems for instrument flight procedure design and ground validation

GEORADAR DIVISION:  The GeoRadar Division designs, manufactures and sells its comprehensive suite of Ground Probing Radar equipment for performing non- destructive investigations.

Istituto Superiore Mario Boella (ISMB) is an applied research centre focused on the innovation enabled by Information and Communication Technologies (ICTs) founded in 2000 by Compagnia di San Paolo and Politecnico di Torino and is located within the new Campus of Politecnico.

Schmid & Partner Engineering AG (SPEAG) is the leading developer and manufacturer of the most reliable, efficient, user-friendly and advanced experimental (DASY, iSAR, SAR/OTA Phantoms) and numerical tools (SEMCAD X) for the electromagnetic near- and far-fields from DC to light. The latest release of SEMCAD X (V14.4 Aletsch) defines a new standard in high performance simulation to solve the most complex EM or Thermal challenges in many industries, including, telecommunications, medical implant, healthcare, microwave and optics.

Thales Alenia Space is European leader reference in telecoms, radar and optical Earth observation, defense and security, navigation and science and space infrastructures and transportation. Thales Alenia Space is a joint venture between Thales (67%) and Finmeccanica (33%) and has 11 industrial sites in 4 European countries (France, Italy, Spain and Belgium) with over 7,200 employees worldwide.


Actions & Services has more than 15 years of experience in µwave systems supply. We have installed a large number of High Tech Telecom Training Labs for students in European technical schools and Universities. We offer 3 different systems: Wave and antenna training system, Microwave experiment kit and a Microwave communication trainers. All those training kits are nicely housed in a small aluminum box and supplied with teaching and experiments manuals. We also have a very large experience in Radar Cross Section measurements and we can supply small fast portable radar up to very large dynamic outdoors systems. We have installed some large dynamics RCS systems in many European countries. Actions & Services is partner with the companies  Antenna Systems Solutions ASYSOL and IMST.

Agilent has provided solutions for Electronics Test and Measurement since 1939. We pioneered the markets for many of today’s electronic test instruments, enabling the digital and wireless revolutions now under way.

ANSOFT is the ANSYS product suite for hi and low frequencies simulation. Founded in 1970, ANSYS employs over 1,600 employees, many of whom are engineers dedicated to research and development with the goal of pushing the limits of ANSYS world-class technology, so our customers can turn their design concepts into successful, innovative products. ANSYS develops, markets, and supports engineering simulation software used to predict how product designs will operate and how manufacturing processes will behave in real-world environments. The Company continually advances simulation solutions by, first, developing or acquiring the very best technology; then integrating it into a unified and customizable simulation platform that allows engineers to efficiently perform complex simulations involving the interaction of multiple physics; and, finally, providing system services to manage simulation processes and data — all so engineers and product developers can spend more time designing and improving products and less time using software and searching for data.

ASYSOL is one of the most technologically advanced organisations capable of leading in the invention, development and manufacture of the RF industry's most advanced test systems (antenna metrology, antenna development, microwave components, automation and software), with the result of providing professional solutions, services, consultancy and training.

Astrium, number 1 space company in Europe and 3 worldwide, employs 15,000 men and women in France, Germany, Netherlands, Spain and UK. All professionals chosen from among the very best, all passionate about space.

AWE's WinProp software suite provides accurate propagation models with short computation times for rural, urban, indoor and tunnel scenarios. WinProp supports arbitrary transmitters incl. cellular and broadcasting sites, satellites, repeaters, and leaky feeder cables. Beyond propagation WinProp includes adaptive modules for the simulation and planning of wireless cellular and broadcasting networks (2.5G, 3G, LTE, WiMAX, WLAN, DVB, ...).

Bluetest provides efficient and accurate Reverberation Test Systems with software and hardware for Over – The – Air (OTA) measurements of small antennas and wireless devices with small antennas. Bluetest's technology uniquely solves test challenges of next generation wireless capability, such as MIMO, to evaluate and optimize important end-user requirements such as coverage, throughput and battery lifetime, very fast and cost efficient compared to traditional systems.

We at E&C Anechoic Chambers are committed to continue and further improve the over half-a-century lasting excellence in development and manufacturing of absorber material for anechoic chambers.Our focus will remain on the worldwide EMC- and Antenna-Test Site Market. In joining the Albatross Projects Group we benefit of their project management capabilities, thus concentrating our resources to provide innovative products and remain at the forefront of “cutting edge” absorbers for the Test Site Market.Always tuning your challenges!

EMCoS focuses on generation of special simulation software. Powerful simulation tools and techniques lets solve complex EM problems in fast and efficient manner. EMCoS software is widely used in automotive, aircraft and naval industries. Application areas include: EMC in large systems, antenna simulations, complex harness processing, shielding study, PCB simulations.

EMITE Ing provides fast, repeatable and accurate MIMO measurements and MIMO OTA compliance testing with the 8x8 MIMO Analyzer Series E for a wide variety of fading environments in a single and intuitive interface. The MIMO Analyzer is the first of its kind mode-stirred reverberation chamber to offer the advantages of direct measurements of correlation, mutual coupling, efficiency, diversity gain, MIMO capacity, gain and capacity loss due to the user’s presence or efficiency, Mean Effective Gain (MEG), Effective MEG (EMEG), Branch Power Ratio (BPR), Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), MIMO TRP, MIMO TIS, MIMO Throughput and Channel Quality Indicator (CQI)  among other important parameters for the MIMO engineer for arbitrary fading environments including Rayleigh, Rician, isotropic, non-isotropic, standardized IEEE 802.11n and others for LTE, HSPA+ and other 4G technologies through Sample Selection®.

EMSCAN has provided electromagnetic very-near-field test equipment to Design, Verification and Compliance Engineers since 1989, using a patented planar grid array of antenna. Our solutions create visual representations of electromagn.etic values in real-time and offer unique, extremely fast and cost effective solutions to complex problems facing PCB and Antenna Engineers today.

RFxpert is the only real-time, compact, bench-top antenna measurement equipment. In less than a second, unique array of automatically switched probes calculates accurate FF patterns & radiated power levels based on NF measurements.

EMxpert is a real-time, compact, bench-top EMC/EMI diagnostic tool enabling designers to rapidly diagnose&solve EMC/EMI problems in a single design cycle.

ESoA is a geographically-distributed no-profit post-graduate school on antennas, propagation and relevant applications. The ESoA courses are distributed in the most accredited European research centres on antennas and wireless systems. The general objectives of these courses are: 1. providing a post-graduate education on antennas and propagation and relevant applications with emphasis on wireless systems; 2. augmenting the advanced formative offer at international level to complete individual PhD curricula; 3. increasing the ties in wireless research and development between Universities and Industries on a European scale; 4. facilitating the interchange of ideas among early-stage researchers and trainers as well as among young researchers, thus increasing the future mobility and synergy.

IMST GmbH is a competence centre and professional development house for high-frequency circuits, wireless modules, and communications systems. We provide individualized support to any customer during every phase of product development, from initial consulting to series production. IMST has the added resources of critical partnerships in the commercial marketplace and in the publicly sponsored research sector. IMST presents EMPIRE XCcel™ the ultimate design tool for microwave components and antennas – ultra fast and accurate full 3D FDTD.

JAST Antennas, a ViaSat company, offers satellite antenna and phased array design, fabrication, installation, and service, primarily for mobile satellite communications from L-band to Ka-band.

Mician GmbH provides microwave engineers with fast and accurate design tools that significantly speed up the development process by reducing cycle time. The goal is to avoid the use of time consuming 3D solvers wherever possible and to focus on applying the Mode-Matching Technique and its derivatives instead, even on structures that at first glance seem to be suited for 3D solvers only.

MICROSPACE is specialized in the exclusive representation of leading U.S. and European manufacturers of RF & Microwave components, Antenna Measurement Systems, Antennas,RF and Dielectric Absorbing Materials, Inertial Navigation Systems, GPS Timing Equipment, mostly working in the defense and aerospace markets.

MI Technologies is the leading global supplier of RF and Microwave products, systems, services and training. We engineer, deliver and service innovative, customized solutions for complete test facility design, analysis & construction, automated test equipment, development of microwave and RF products, wireless solutions as well as services and comprehensive on-premise and in-house training capabilities…..all to create a world class suite of products and solutions for our customers.

NEWFASANT is a company that develops and commercializes NEWFASANT, a tool that simulates electromagnetic fields for studies or designs of Electromagnetic Compatibility, Antennas and antennas interaction with structures, Radar Cross Section (RCS), including ISAR and Doppler, Radio Propagation,  Radio system analysis and Design of passive microwave components. We are leaders in ray-tracing techniques, computational geometry and sophisticated techniques of Method of Moments.


NSI has been providing state of the art antenna measurement systems for 21 years. To date we have delivered more than 450 such systems worldwide. NSI draws upon the foremost industry experts to offer a complete line of test systems that include Planar, Cylindrical and Spherical near-field systems,  Far-field systems, High-speed RF subsystems, Advanced antenna measurement software,  Anechoic chamber solutions, Turn-key project management and Antenna range upgrade solutions. NSI also offers in-house test facilities for contract antenna testing and consulting services for range evaluation and accuracy assessment.

Rohde & Schwarz is Europe’s leading manufacturer of electronic test and measurement equipment. We offer a full range of microwave T&M instruments up to 325 GHz including signal generators, spectrum analyzers, network analyzers and power meters.

Saab's Compact Range in Gothenburg, Sweden performs fast and accurate antenna measurements over a wide operating frequency band. Our measurement service provides you with a complete measurement program together with all the relevant documentation. The antenna measurement service is accredited to ISO 17025.

SIEPEL is a manufacturer of a wide range of microwave absorbers and anechoic chambers dedicated to EMC, antenna testing and compact range. These absorbers are designed per numerical simulation. Our outstanding centralized workshops in France associated to a 25 years experience and the skills of our installation team enable us to offer high quality materials and fast delivery schedules. With more than 15 representatives we bring a worldwide basis.

Space Engineering, a management-owned SME incorporated in 1989, structured as Group comprising TeS-Teleinformatica e Sistemi. Core business of Space Engineering, is the Space market. SE operates at both system-level (performance/assessment/design) and equipment-level (HW/SWdesign & Implementation).

The Microwave Vision Group (MVG) combines the technological expertise, product portfolios and infrastructures of three industry leaders: SATIMO, ORBIT/FR and AEMI. MVG is the world’s largest supplier of antenna measurement solutions and offers an unrivaled range of antenna measurement technologies. Our expertise ranges from compact ranges, indoor and outdoor far field ranges to near field ranges in all geometries and sizes.

TICRA are the developers of the de facto standards in spacecraft reflector antenna design software, GRASP, POS and CHAMP. TICRA also supply the spherical near-field far-field transformation software, SNIFT. A preview of next generation GRASP (ver. 10) can be seen at the conference, together with the new development DIATOOL. DIATOOL is a software package aimed at antenna diagnostics in measurement facilities, using both spherical-wave to plane-wave transformation and inverse Method of Moment techniques. TICRA also provides expert consultancy services within the field of antenna design, installed performance and anomaly investigations. Meet our experts at Booth 32.

Offers precision ground station antennas/stations in the fields of satellite communications, remote sensing, TT&C, deep space missions, astronomy, including services as design/engineering, software development, in-plant integration, on-site installation, commissioning, acceptance testing, aftersales-services.

Wiley-Blackwell are a leading international publisher of print and electronic products, specialising in scientific and technical books and journals. Visit our stand at EuCAP and view our new and bestselling books in the area. All books on display are available at a special conference discount. Alternatively you can find out about all of our publications online:

WIPL-D, with its flagship software products WIPL-D Pro and WIPL-D Pro CAD, as well as consulting services, enables users worldwide to perform fast and accurate high-frequency simulations of antennas, microwave circuits, scatterers, EMC problems, antenna placement etc. Simulations are performed using the powerful combination of MoM and higher-order basis functions.

Organised by
Sponsored by



Supported by
Important Deadlines

Submission of final papers
15th February 2011

« October 2020 »